Stock internals? Look here

[RacerXI]

If you're still on stock internals in your block, let me know what PSI you are running and how many miles you've got on it. Thanks.

[93SolSi/GSR]

I am running 10 psi and 11,500 miles on motor

[Max Psi GSR]

30,000 with 6psi, and 20,000 on 10psi. Over 500 1/8th mile runs, 4 1/4 runs, over 50 autox's, and 2 two day road courses.

Made 210/156 hp/tq at 6psi, and 256/181 hp/tq at 10psi.

These motors are really bullet-proof if you use your head and dont try and get an extra 2-5whp out of leaning fuel or advancing timing. Total miles on the car were around 85,000.

Use your head and dont believe everything your told......READ

Tony

[217gsr]

Total mileage ~90,000 miles

Went 6 psi at 52,000 miles
Went 9 psi at 72,000 miles

[grand600intercooled]

94,xxx miles on engine
10,000 @ 6psi
40,000 @ 8psi
10,xxx @ 11psi with air to water
more experiments to come...

[JRCivic]

94,XXX miles on the GSR engine.
51,000 miles on the blower @ 8psi.
Nearly 1000 1/4 mile passes and just as many blasts up the street with a customer in the car !!!

It's like the Energizer Bunny: It just keeps GOING and GOING...

[CROM]

-Installed blower at 14000 miles.
-Went 10psi at 65000 miles
-Currently 71000 miles on car.

total with blower, 57,000 miles.

Not too shabby. Ive got a "few" [img]wink.gif[/img] quarter mile and 8th mile runs under my belt as well...

<font color="#a62a2a" size="1">[ April 13, 2003 10:17 AM: Message edited by: CROM ]</font>

[cpa]

Installed 6 psi at 60,000 miles in April '00
Went 9 psi around 87,000 miles
Now at 102,000 miles
Going to the 1/8th again on Friday!

[Jay Lee]

6psi kit installed at 95,000 miles, Jan '02
Jim's stepper pulley upgrade installed at 140,000 miles (should be 8psi but shows 10psi on MAP sensor), March '03
currently at 147,000 miles

dyno'd 251 Hp/181 Lb-Ft, averages 27mpg on 80% highway driving...

Hondata engine management.

[RacerXI]

Thanks guys. My 60K mile B16A2 dropped a ring about a month ago after installing my JRSC & Hondata. It's currently under the knife being rebuilt and I was just asking. Thanks for all your replies. My motor was a freak in a bad way. [img]graemlins/cry.gif[/img]